2024/2795
Application Details
Description
A1 = (Ash 'falix') Medium Tree Pollard To restore the tree to its previous pollard points or establish new ones as needed. To reduce the tree's height by 6 meters and its spread by 3 meters. To eliminate any dead or decaying wood identified during aerial inspection. To eliminate any basal growth on the trunk. A2 = (Ash 'falix') - Small Tree Pollard To restore the tree to its previous pollard points or establish new ones as needed. To reduce the tree's height by 5 meters and its spread by 2 meters. To eliminate any dead or decaying wood identified during aerial inspection. To eliminate any basal growth on the trunk. A3 = (Ash 'falix') Small Tree Pollard To restore the tree to its previous pollard points or establish new ones as needed. To reduce the tree's height by 6 meters, and it's spread by 4 meters. To eliminate any dead or decaying wood identified during aerial inspection. To eliminate any basal growth on the trunk. SY1 = (Sycamore) - Small Tree Reduction To reduce tree by 30% in overall canopy, estimated 3 meters in height and 3 meters in spread. To lift lower branches to crown break, estimated 4 meters from ground level. To thin branches by 20 % and dead wood significant branches. P1 = (Privett) - Small Tree/Shurb Felling To remove the tree to ground level, to estimated 0.2 centimetres, to avoid blunting saws. Both Privett hedges surrounding small lawns. B1 = (Beech 'fagus') - Small Tree / Shrub Topping To remove specifically the height of the tree hedge by an estimated 0.5 meters. To leave 5ft 6" tall, slightly above the pillars as discussed. To reduce the spread of the Beech tree by 0.3 meters. To follow the Beech, hedge the hole way around the perimeter of the Management block as shown in request. Estimated 60 meters. SG1 = (Privet) Tree Stump Grinding Width (0.2) meters To professionally grind or digout, tree stumps below ground level to a depth of approximately 20-30cm. Access of a minimum width of 64cm is required through gates and side accesses.
Council
Hackney
Application Type
Works to a Tree in Conservation Area Notification
Date Received
18 Dec 2024
Date Validated
18 Dec 2024
Council Website
View on Hackney websiteLocation
Address
Alcock House Queens Drive, Hackney, London, N4 2TB
Postcode
N4 2TB
Coordinates
51.560654012566097, -0.092153555557676
Source: Lat and Lng
Quick Info
- UID
- 2024/2795
- Reference
- 2024/2795
- Status
- Decided and closed
- Last Updated
- 18 Sep 2025