4507/23Sub01

Description

8. The Developer shall comply with the following conservation requirements of the Planning Authority: a) A conservation expert with proven and appropriate expertise shall be employed to design, manage, monitor and implement the works and to ensure adequate protection of the retained and historic fabric during the works. In this regard, all permitted works shall be designed to cause minimum interference to the retained fabric of the Protected Structure. b) The proposed development shall be carried out in accordance with the following: i. All works to the structure shall be carried out in accordance with best conservation practice and the Architectural Heritage Protection Guidelines for Planning Authorities (2011) and Advice Series issued by the Department of Housing, Local Government and Heritage. Any repair works shall retain the maximum amount of surviving historic fabric in situ. Items to be removed for repair off-site shall be recorded prior to removal, catalogued and numbered to allow for authentic re-instatement. ii. All existing original features, in the vicinity of the works shall be protected during the course of the refurbishment works. iii. All repair of original fabric shall be scheduled and carried out by appropriately experienced conservators of historic fabric. iv. The architectural detailing and materials in the new work shall be executed to the highest standards so as to complement the setting of the protected structure and the historic area. v. Original window openings shall receive timber windows that are historically accurate. Replacement windows should be of appropriate material, design and detail and approved by the planning authority prior to any work commencing. vi. Revised roof plans and elevations shall be submitted showing the omission of the dormer and its replacement with conservation rooflights, including 1:10 details. vii. A conservation methodology for the proposed façade and roof works shall be submitted. viii. Any replacement rainwater goods shall be cast iron replacements.

Council Website

Address

15, Herbert Lane, Dublin 2 (to the rear of 20 Herbert Place-A Protected Structure RPS 3721)

Coordinates

53.335904966248776, -6.244301804757598

Source: Lat and Lng