Gullfoss The Glade Kingswood Surrey KT20 6JE
This application is for the reduction of multiple trees and the reduction of one Magnolia tree.All trees are believed to be covered under a blanket and have all clearly been reduced in the past.The main reason for the reduction of the trees is to allow more light in and around the property and reduce leaf matter, moss and lots of dead branches dropping from the Ash trees damaging the cars and the garage roof.T1- Large Ash tree situated at the front of the property as you drive down your drive on the left side. Reduce the crown by 1.5m all round back to suitable growth points above previous pruning points and remove all dead wood. The tree is showing signs of early Ash with constant twigs and small branches dropping covering the driveway and grass verge.T2- Reduce the crown of the Cherry tree back to previous pruning points by reducing it by 1.5m all round to create a well shaped and balanced crown. Thin the crown by 15%.T3- Reduce the Ash tree next to the garage by 2-3m in height and prune selected lateral limbs to create well shaped and balanced crown The crown is showing signs of moderate Ash die back and has dropped 4 medium sized limbs landing on the garage roof below. The twigs dropping have blocked the gutters and the customer would like to keep the tree as long as possible without causing future damage to his property.T4-Reduce the crown of the large Oak tree by 2m all round taking it back to healthy growth points to create a well shaped and balanced crown. The crown is currently very dense and causing issues with lots of moss taking over the grass below. A reduction will help with leaf matter and sun light to the garden and property.T5- Beech, reduce the crown of the Beech tree by 1.5-2m all round, back to previous pruning to create a well shaped and balanced crown. The crown is very dense with small growth a 15% crown thin will allow more light into the garden and property while keeping the natural shape of the tree.T6- Remove the Magnolia tree i...