Bourton Mill Factory Hill Gillingham SP8 5AX
T002 - Ash - Fell to ground level due to significant signs of ash dieback. T003 - Ash - Reduce branches overhanging the boundary as per annotated photograph to maintain adequate clearance and minimise potential future damage to the property. T005 & T006 - Alder x2 - Reduce branches overhanging the boundary by cutting back or removing secondary and tertiary branches to a height of 3-4m from ground level back to fence boundary line to provide sufficient clearance from recently approved house and prevent future growth from encroaching into the new garage. Remove dead wood and broken branches. T009 - Fell to ground level due to early signs of ash dieback. T010, T011 & T012 - Alder x3 - Reduce branches overhanging the boundary by cutting back or removing secondary and tertiary branches to a height of 4-5m from ground level back to fence boundary line to provide sufficient clearance from recently approved house and prevent future growth from encroaching across the new driveway. Remove dead wood and broken branches. T014 - Ash - Remove overhanging trunk due to significant signs of ash dieback. T015 - Ash - Reduce damaged/decayed stems overhanging Bourton Mill site back to old pollard points to minimise future stem failures over the access drive area. G016 - Hazel - Reduce damaged/decayed stems on the Bourton Mill side overhanging the access drive to minimise future stem failures over the access drive area.